Why Backsense®
 
Industries such as mining, quarrying, agriculture and construction use machines and plant equipment, which by their very nature pose a danger if they are not managed safely. Blind spots tend to be much larger on these vehicles and include not only the rear and nearside but also the front, especially with elevated driver positions. Terrains are harsh, vehicles are exposed to the elements more aggressively whilst thick dust and darkness decrease visibility further.
 
The ISO 5006 standard for earthmoving equipment addresses the problem of blind spots around a vehicle. It states that in order to enable proper, effective and safe operation the operator must be able to ‘detect the presence of a standing person (of approximately. 1.5m tall), 1m out from the perimeter of the machine.’ Camera monitor systems provide this to some extent, but in difficult conditions a range of complementary devices are vital to give visual and audible operator warnings.
 
 
Backsense® Radar
 
Backsense® heavy-duty radar sensor systems are designed to detect people and objects in blind spots, significantly reducing accidents. They detect stationary and moving objects, providing the driver with in-cab visual and audible warnings – alerting the operator whose attention cannot be focused on all danger areas. Backsense® obstacle detection sensors work effectively in harsh environments and in poor visibility including darkness, smoke and fog.
 
Backsense® radar sensors are available in fixed detection range models and fully programmable models allowing bespoke detection areas and the ability to calibrate-out fixed objects or bodywork.
 
 
Features & Benefits
 
Backsense® radar uses Frequency Modulated Continuous Wave (FMCW) technology, transmitting a continuously varying radar frequency signal with unique time stamps to each instance of the wave. The time of the returning wave is referenced to the stamp without the radar needing to pause transmitting. This gives more accurate detection than alternative radar products using Pulsed Radar technology that transmit a burst of radar and then listen for the returning wave.
 
Backsense® is available in 3 pre-set width and length models and a fully programmable radar, allowing complete control of the radar beam pattern and detection area.  The spread and length of the beam can be set to the width of your vehicle or beyond (from 2m to 10m (6.5ft -33ft) width and 3m to 30m (10ft-98ft) length) and bespoke detection areas can be set to calibrate-out fixed objects or bodywork.
 
 
Backsense® OSD (Radar On-Screen Display)
 
Radar sensor data and camera image combined with Brigade’s Radar sensors minimise both vehicle damage and collisions by informing the driver of the distance between vehicle and obstacles, whether moving or stationary. Ideal for vehicles and machines maneuvering at low speed.
 
Working in conjunction with a Backeye® camera monitor system and up to two Backsense® Network radar detection systems (one supplied with the on-screen display module kit), the on-screen display warns the driver of obstacles in the danger zone by overlaying 5-stage audible and visual radar data onto the camera image on the monitor.
 
Integration of Brigade’s Backsense® object detection systems and Backeye® camera monitor systems to improve safety
Up to 2 Radar detection warnings overlaid onto camera image on in-cab monitor
Reduce driver stress and distractions as all information is in one place.
 
 
Radar IP69K Water and Dust Proof Display
 
Radar heavy duty display works in conjunction with the IP69K sensor BS-9000 (one supplied with BS-9000-WD) to provide ultimate water and dust/sand protection. It’s protective design allows it to be used in any application, even with open cab vehicles exposed to temperatures from -40°C to 85°C. The Radar display can be connected to one sensor and be set to the width of 2m to 10m (6.5ft – 33 ft) and 3m to 30m (10f – 98ft) in length.
 
5 stage audible and easy-to-read visual display
Suitable for both on- and off-road applications
Heavy duty – designed for severe weather conditions and all terrains
Excellent resistance to moisture, dust, sand, vibration, heat, cold, UV, snow, ice, high wind, water and mud
 
Unique to Brigade
Frequency modulated continuous wave radar technology
Controlled beam pattern to minimise false warnings
Excellent close-in detection
5 stage audible and easy-to-read visual display
Suitable for both on- and off-road applications
Heavy duty – Designed for severe weather conditions and all terrains
Meets Health and Safety requirements
Unaffected by moisture, dust, vibration, heat, cold, UV, snow, ice, high wind, water and mud